ReadMe

This ReadMe contains information about the Driver Installation and the Firmware Update of DirectOut devices with USB port (except ANNA-LISA and M.1k2).

Driver Installation

D.O.TEC CDM V 2.12.28 								07/01/2018

Combined Driver Model for Windows XP / Vista / 7 / 8 operating systems. This driver provides access 
to both virtual COM port and the proprietary direct interface access. The driver works with 
MADI.SRC, PRODUCER.COM, MA2CHBOX(.XT) and ANDIAMO series.

Installation Guide

1. Unpack the driver files into a temp directory.

2. Connect the USB port of the device to a USB port of your computer.

3. Switch the device on.

4. Windows will automatically detect the device and start the Hardware detection.

5. In the first dialog click "Do not search the Internet at this time".

6. Point the Hardware Installer to the directory where you unpacked the driver.

7. When Windows complains that the Windows Logo Test failed, click "Continue".

8. After the Installation is finished Windows will detect the virtual com port of the device.
   Repeat steps 4..7.

9. When the Installation is done you can delete the temp directory.


Firmware Update

Installation Guide

1. Unzip the DO_UPDATE_xx.zip to a temp directory.

2. Double-Click DO_Update_Setup.msi.

3. Follow the instructions in the Installer.

9. When the Installation is done you can delete the temp directory.

4. Run DO_UPDATE.EXE.


For further help please visit our Website www.directout.eu and download the Driver Installation Guide.
If you need more assistance please contact support@directout.eu.

Copyright 2018 by DirectOut GmbH
