DirectOut ANDIAMO.MC Firmware ReadMe, 2019-04-05

Version 4.8
- MADI RX Unlock behavior improved


Version 4.7
- issue with remote control for Yamaha AD8HR (Remote Protocol C) <- fixed


Version 4.6:
- phase reverse issue at analog output (only devices with new DA converters) <= fixed


Version 4.4:
- issue with device activation < fixed
- issue with embedder for MIDI-over-MADI < fixed
- new: defeat delay compensation 
- modified: level meter: low level start @ -60dBFs

The new features are accessible with ANDIAMO Remote v3.0 (Windows®) or higher.
Version 4.1:
- fix in gui

Version 3.6:
Features:
- Output Gain for analog outputs
- 'Mute All' Function for output gains
- 4 FS Support - sample rates up to 176,4 / 192 kHz
- Disable MADI remote - New switch, forces remote functionality to USB only, even if there is incoming control data via MADI.

The new features are accessible with ANDIAMO Remote v2.5 or higher.

Version 3.3:
Features:
- Extended Routing added
- DA Calibration added - adaption of DA reference level in 0.1 dB steps. The calibration is applied when the ANDIAMO is set to input or output level 'LOW'.

Version 2.1:
Features:
- 'Remote Protocol C' added for Yamaha AD8-HR (used by DM2000) and AD824 (used by DM1000)
- 'Remote Protocol D' added for SSL (Alpha Link Live-R and 8-RMP, C10, C100 & C200 consoles)
- 'Display Dark' added to mute LED display
- 'Identify' added to determine selected device (in scenarios with several devices involved)

Version 1.9:
- Rearranged 'Remote Protocol' setting:
	Remote off: D.O.TEC protocol via MIDI-over-MADI and USB active, Serial-over-MADI is transmitted transparently
	Remote A: D.O.TEC protocol via MIDI-over-MADI, Serial-over-MADI and USB
	Remote B: ProTools (AVID PRE) protocol via MIDI-over-MADI, D.O.TEC protocol via Serial-over-MADI and USB
- Display Dark option added
- Relais reset on boot
- GPO switch did not work as expected when triggered by PRODUCER.COM Hardware Remote <- fixed

Version 1.8:
- adds support for ProTools remote control (Avid PRE compatible)

Version 1.7:
- improved control data handling

Version 1.5:
- Levelmeter support for Mic/Line Inputs (requires ANDIAMO Remote Software v1.6)
- GPO Polarity switchable
- GPOs switch compatible with PRODUCER.COM -> ANDIAMO.MC GPOs can be switched by the PRODUCER.COM Hardware Remote (Red light / White light buttons) if a direct connection
between PRODUCER.COM MADI port 2 (com) and ANDIAMO.MC is available.


DirectOut GmbH, 20149