DirectOut ANDIAMO.MC Firmware ReadMe, 2019-04-05 Version 4.8 - MADI RX Unlock behavior improved Version 4.7 - issue with remote control for Yamaha AD8HR (Remote Protocol C) <- fixed Version 4.6: - phase reverse issue at analog output (only devices with new DA converters) <= fixed Version 4.4: - issue with device activation < fixed - issue with embedder for MIDI-over-MADI < fixed - new: defeat delay compensation - modified: level meter: low level start @ -60dBFs The new features are accessible with ANDIAMO Remote v3.0 (Windows®) or higher. Version 4.1: - fix in gui Version 3.6: Features: - Output Gain for analog outputs - 'Mute All' Function for output gains - 4 FS Support - sample rates up to 176,4 / 192 kHz - Disable MADI remote - New switch, forces remote functionality to USB only, even if there is incoming control data via MADI. The new features are accessible with ANDIAMO Remote v2.5 or higher. Version 3.3: Features: - Extended Routing added - DA Calibration added - adaption of DA reference level in 0.1 dB steps. The calibration is applied when the ANDIAMO is set to input or output level 'LOW'. Version 2.1: Features: - 'Remote Protocol C' added for Yamaha AD8-HR (used by DM2000) and AD824 (used by DM1000) - 'Remote Protocol D' added for SSL (Alpha Link Live-R and 8-RMP, C10, C100 & C200 consoles) - 'Display Dark' added to mute LED display - 'Identify' added to determine selected device (in scenarios with several devices involved) Version 1.9: - Rearranged 'Remote Protocol' setting: Remote off: D.O.TEC protocol via MIDI-over-MADI and USB active, Serial-over-MADI is transmitted transparently Remote A: D.O.TEC protocol via MIDI-over-MADI, Serial-over-MADI and USB Remote B: ProTools (AVID PRE) protocol via MIDI-over-MADI, D.O.TEC protocol via Serial-over-MADI and USB - Display Dark option added - Relais reset on boot - GPO switch did not work as expected when triggered by PRODUCER.COM Hardware Remote <- fixed Version 1.8: - adds support for ProTools remote control (Avid PRE compatible) Version 1.7: - improved control data handling Version 1.5: - Levelmeter support for Mic/Line Inputs (requires ANDIAMO Remote Software v1.6) - GPO Polarity switchable - GPOs switch compatible with PRODUCER.COM -> ANDIAMO.MC GPOs can be switched by the PRODUCER.COM Hardware Remote (Red light / White light buttons) if a direct connection between PRODUCER.COM MADI port 2 (com) and ANDIAMO.MC is available. DirectOut GmbH, 20149